A Practical Guide For A Home Theater Moving

Watching your favorite movies and series from the comfort of your home is something special. In fact, it is so special that you have no doubt about relocating your home theater with you. However, it is extremely important to perform the relocation right, as you don`t want to damage the video or audio quality of your home theater. This is precisely why we have created this practical guide for a home theater moving.

Gather the right moving supplies

The must-have packing and moving supplies are the core of every relocation. For moving your home theater here is what packing equipment you will need.

• Moving boxes – Ideally, you should use the original packaging for your home theater equipment. However, if you don`t have it, use high-quality moving boxes in the size of the items you will relocate.
• Packing peanuts – Cushioning the moving box is important, especially when relocating fragile items. You can use crushed newspaper instead of packing peanuts.
• Tape – To seal your box firmly, use high-quality painter`s tape for moving boxes.
• Marker – Label the boxes with a waterproof marker. Make sure to write Fragile and this side up and down on the moving boxes.

Take photos

Before you pack your home theater for moving, remember to take detailed photos of how everything looked like before relocation. Taking photos is an excellent decision for several reasons. First of all, it is a great way to find out whether there was certain damage, scratch, or dent before relocation. Also, it makes setting up your home theater much easier, as you will be able to connect everything by looking at the photos.

Disconnect all the cables

The home theater consists of many cables you will need to sort out, pack, and later set up. However, this part should not scare you as long as you have everything ready for labeling. You should get several different colored sticky notes and label a cable and the piece of equipment where the cable should go in the same color. This makes re-installing your home theater less stressful as there is not a lot of room for errors.

Place the cables in a single bed

For each piece of home theater equipment, prepare to have a bag in which you would place the cables. You can also zip tie the cables to prevent tangling. When you place all the cables from the theater into specific bags, you should use one small moving box, or a bigger bag just to transport the cables in.

In this way, when you start to unpack, you will have all the cables neatly labeled, and ready for use immediately. With no tangling issues, and when you know which cables go to which piece of equipment, you can set up your home theater fast and enjoy your favorite movies as soon as you move into your new home.

Gather all the remotes in one bag or box

Gather the remotes that you have in your home theater and place them in one bag. You can also use the same bag for your audio equipment remotes, and with remotes from your regular TV. The key is to have similar pieces together so that you don`t waste time looking for them once you start unpacking. If the remotes are similar, you can also label them by writing to which piece of equipment they belong to.

Clean your home theater equipment

Moving to a new home is a perfect opportunity to clean your home theater as you will be able to reach all the spots. Use a wet cloth to wipe the dust off, and then use a dry towel to dry the equipment. You can do this before the relocation, and once again as you unpack. The second time around, you will not have to be as detailed, as the home theater is already clean.

Use original packaging for relocation

If you still have original boxes in which you received your home theatre, now is the time to use them again. On the other hand, if you don`t have them you can order custom-made moving boxes to fit your home theater equipment. Or, if you can find sturdy, high-quality moving boxes approximately the same size as the items you are relocating, you can use those as well. Ideally, the moving box will be a couple of inches bigger than the item itself.

Prepare the moving box for relocation

You should never place an item directly into the box without applying some cushioning first. Use packing peanuts, crushed paper, or towels and place them at the bottom of the box. Then, proceed to place an item carefully into the moving box. Once the item is in the box, apply the cushioning to the top of the box and to the sides of the box if there is any spare room left.

Check whether the box is properly packed

Knowing how to pack fragile items is of the utmost importance here. The item should not move inside the moving box. If the box is properly packed, you should not hear any moving sound when you gently shake the box to the right and left. If the item is moving inside, this means that it is not safe to transport it, as it may get damaged. Apply more cushioning, or use a smaller box if possible, if there is too much empty space left in the box.

Label the moving boxes

Once you have packed the item safely inside the moving box, it is time to seal the moving box and label it. Labeling moving boxes like a pro is the most important part of the relocation, whether it is a DIY move or with professional movers. Use a waterproof, high-quality marker and write Fragile on at least three sides of the moving boxes.

Hire professional movers

Moving a home theater means that you want to continue to enjoy watching movies and shows from the comfort of your home. Every relocation comes with a certain risk, a risk of damaging the item or the item’s quality. One way to reduce the risk of damage is to hire insured movers NYC who have years of experience with the relocation of fragile items. With reliable Brooklyn local movers on your side, you will be able to move your home theater quickly, efficiently, and safely.